Home    >    Products    >    Turbine Flow Meters    >    Sanitary Turbine

    Sanitary Turbine  
Hoffer HO3A Series Sanitary Turbine Flow Meter
The Sanitary Turbine flow meter is accepted as meeting 3-A Sanitary Standard No. 28-03 for measurement of process liquids where high sanitary standards are required. Available in 11 sizes,1/4 to 3" with standard Tri-Clamp TM fittings, covering flow rates for 0.35 to 650 GPM.

     **Accuracy & Linearity: ±0.5% of reading or better
     **Repeatability: ±0.1% of reading or better
     Temperature Range: -450°F to +450°F, process fluid with Std. Magnetic pickup coil. -450°F to +850°F, process fluid with high temperature magnetic pickup coil. +1000°F intermittently
     Signal Output: 10 MVRMS or greater into a 10K ohm load at minimum flow rate
     Materials of Construction: 316/316L Dual Rated Stainless Steel (with exceptions noted below):
        Rotor: 17.4 PH SS 
        Retaining Ring: 15.7 MO PH SS 
        Bearings: Hard Carbon Composite
**Based on 12 point water calibration at 70°F
HO3A Series Sanitary Turbine Flow Meter.PDF
HO3A Series Sanitary Turbine Flow Meter Manual.PDF