Home    >    Products    >    PD Flow Meters    >    Economical PD Meter


    Economical PD Meter  
 
Flow Technology DC-E Series Economical PD Flow Meter
 
1/8" to 1-1/2" line sizes
Reference accuracy ±0.1% of rate
Stainless steel construction
Only two moving parts
Bearingless design
Easy to install and maintain
Handles viscosities up to 1,000,000 cP
Operating temperatures up to 250°F (121°C)
Wide range of applications
Non-intrusive sensor 100:1 turndown on medium to high viscosity fluids

     Process Temperature: Up to 250° F (121° C)
     Operating Pressure: Std. 250 psig (1724 kPa)
     Turndown Ratio: (Based on Max. rated flow)
        Low viscosity fluids 10:1 standard
        Medium viscosity fluids 100:1
        High viscosity fluids 1000:1
     Calibration: Calibrated with either a 1cP or 100cP liquid at 50% of maximum rated flow.
     Repeatability: ±0.1% of rate
     Linearity: ±2% on 1cP liquids; ±1% to 2% on 100cP and higher liquids
     Output:
        Hall Effect Sensor: 5-24 VDC square-wave pulse depending on supply, 3-wire, FM Approved, intrinsically safe
        Magnetic Pick-up Sensor: 10 mV to 10 V sine-wave pulse depending on flow rate, 2-wire, Explosion-proof optional
        Signal Conditioners and Transmitters: Refer to individual product sheets
     Materials of Construction:
        Body (Case) and Cover: 300 SS, standard
        Shafts: 316 SS, standard
        Impellers: UHMWPE, PTFE, standard
        O-Rings: Viton® or Teflon® standard
        Bolts: Zinc-plated Grade 8 alloy steel
 
 
DC-E Series Economical PD Flow Meter.PDF
DC-E Series Economical PD Flow Meter Manual.PDF