Home    >    Products    >    PD Flow Meters    >    High Pressure PD Meter


    High Pressure PD Meter  
 
Flow Technology HP-I Series High Pressure PD Flow Meter
 
Up to 3,000 psig operating pressure
1/8" to 1" line sizes, larger size available
Reference accuracy ±0.05% of rate
Only two moving parts
Bearingless design
Easy to install and maintain
Handles viscosities up to 1,000,000 cP
Operating temperatures up to 400° F (204° C)
Wide range of applications
Non-intrusive sensor
Up to 1000:1 turndown Handles pulsating flow

     Process Temperature: Up to 400° F (204° C)
     Operating Pressure: Std. 3,000 psig (20.68 MPa)
     Turndown Ratio: (Based on Max. rated flow)
        Low viscosity fluids 10:1 standard
        Medium viscosity fluids 100:1
        High viscosity fluids Up to 1000:1
     Calibration: Calibrated with either a 1cP or 100cP liquid at 50% of maximum rated flow.
     Repeatability: ±0.05% of rate
     Linearity: ±0.5% of rate over upper 80% of full span. With enhanced signal conditioning, Up to ±0.1% of rate over full turndown range
     Output:
        Hall Effect Sensor: 5-24 VDC square-wave pulse depending on supply, 3-wire, FM Approved, intrinsically safe
        Magnetic Pick-up Sensor: 10 mV to 10 V sine-wave pulse depending on flow rate, 2-wire, Explosion-proof optional
        Signal Conditioners and Transmitters: Refer to individual product sheets
     Materials of Construction:
        Body (Case) and Cover: 316 SS, standard Other materials available
        Shafts: 316 SS, standard
        Impellers: UHMWPE, standard, PPS or PTFE
        O-Rings: Viton® or Teflon® standard
                          Other materials available
        Bolts: Zinc-plated Grade 8 alloy steel
                          Other materials and plating available
 
 
HP-I Series High Pressure PD Flow Meter.PDF
HP-I Series High Pressure PD Flow Meter Manual.PDF