Home    >    Products    >    Mass Flow Meters    >    Flow & Level Switch


    Flow & Level Switch  
 
FOX Model SW100 Flow & Level Switch
 
All welded 304/316 stainless steel
FM Approved explosion proof
CE Approved
NEMA 4X wash-down proof
Single board, "no connectors" design
500 PSIG (35 barg)
No moving parts
DPDT 5-amp relay
Single pot adjustment
Works on gases, liquids and slurries
Clean and Steam in place
±1% of reading repeatability

     Switchpoint Liquid Range: 0.015 to 1 fps (0.005 to 0.3 mps
     Switchpoint Gas Range: 1 to 30 sfps (0.3 to 10 nmps)
     Sensor: -40 to 200F (-40 to 93C), 500 psig (35 barg)
     Enclosure: -40 to 131F (-40 to 55C)
     Response Time: 2 to 20 seconds (application dependent)
     Input Power:
             Standard 24 VDC, ± 10%, 0.6 amp max.
             Optional 115/230 VAC, ± 10%, 50/60 Hz, 25 watts max
     Relay Contacts: 2 form C (DPDT) 5-amp, 250 VAC resistive
     Repeatability: ± 1% of reading switchpoint
     Sensor Material: 304/316 Stainless Steel
     Switch Point Adjustment: Field set with single pot
     Clean and Steam in place
     Enclosure: Cast Aluminum; NEMA 4X, explosion-proof, Factory Mutual approved Class I, Division 1, Groups B, C & D (T2C). Class II/III, Division 1, Groups E, F & G (T2A).
     CE approved.
 
 

SW100.pdf
SW100_manual.pdf